On the first day I started to build I worked on the wall. I built the frame for my project. I put the studs in as well at this point. The frame came to 4' by 4'. It was put together with 2''x 4''. The studs were 16'' on center from the edge of the frame. Once I got the frame together I started to put the outlet boxes were they needed to be. I was able to get all the boxes on the first day but the light boxes because the ones I got were to small for my lights. Once the boxes were on I cut a peace of plywood to 4' by 4' so it can go on to the front of it acting like the wall. At this point s started measuring out were the boxes were on the frame so I could cut the holes in the plywood. Once all the holes were drawn on the plywood I started to cut them out. Once the were cut out the holes all lined up to put the boards on. At this point I did all I could do.